Garrett CS-5000 Walk-Through Metal Detector

Garrett Walk-Thru Dectectors are not available to purchase on-line Please contact us through our contact us page or on 64 9 477 2800 to speak to one of our product specialists about your walk-thru or security needs or for quotes

Features:

The CS 5000 is one of the industry's most economical and effective walk-through metal detectors. Its microprocessor technology offers greater sensitivity for detecting weapons from the archway to the floor. It is constructed with attractive scratch and mar-resistant laminate with resilient end caps to endure high-volume security checkpoint usage.

• Microprocessor technology in detection and control circuitry—includes 20 standard application programs.
• Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus all wiring, connections and electronics—are integrated into a single overhead compartment to eliminate exposure of wires and the external control box.
• Uniform coverage from archway to floor.
• Greater sensitivity for detecting metal weapons—maximum of 200 distinct sensitivity levels.
• Continuous online report of operating status.
• Tamper proof settings through computerized access codes.
• Three levels of ankle-boost sensitivity.
• Self diagnostic program: complete and automatic.
• Noise reduction to prevent false alarms.
• Rugged, lightweight design for simple maintenance and easy portability.
• Easy assembly: designed with only four (4) pieces and eight (8) screws. Simple-to-follow instructions.
• Optional battery pack for use anywhere; provides up to 20 hours of backup.
• Limited 24-month warranty: parts and labor. 

Specifications:

Temperatures
Operating: -4º F (-20º C) to +140º F (60º C)
Humidity to 95% non condensing
Storage: -40º F (-40º C) to 158º F (70º C)

Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 55 watts; no rewiring,
switching or adjustments required. Power supply meets UL, CSA, TUV
and VDE standards.

Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures,"
IEC 529.

Interference Suppression
100% sensor coil Faraday shielding; special Garrett built-in circuitry
for noise suppression and ignoring x-ray monitor horizontal sync.

Traffic Counter
Built-in and resettable with current reading available on LCD panel.

Synchronization
Multiple channels permit several CS 5000s and other Garrett detectors
to operate simultaneously in close proximity.

Alarms
Ready light indicates unit is operational; alarm lights and audible
alarms are activated when the target amount of metal is detected;
LED bar graph indicates amplitude of alarm signal.

Tamper-Proof
Dual-level access codes required to set or change all sensitivity settings
and detection programs; one level for use by supervisors in
selecting programs and sensitivity and the other for initial set-up and
overall control; non-resettable sequence code logs all changes made
whenever sensitivity codes are accessed. An audible alarm reports
unauthorized attempts at access.

Infrared Sensor
Improves analysis of detection signal; increases throughput; helps
eliminate "false alarms" and also provides accurate traffic counter.

Control Outputs
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.

Masking
Programs designed to eliminate the problem of dissimilar targets
canceling each other.

Construction
Attractive scratch and mar-resistant laminate with resilient end caps;
control panel and cross members made of heavy duty aluminum.

Warranty
24 months, parts and labor        

Dimensions:

Manual: 

 Garrett CS-5000 Walk-Through Metal Detector Spec Sheet PDF